Cleaning: the machine is fully automatic and can clean 30 suction nozzles at a time. Different types of suction nozzles are equipped with different tool trays, and suction nozzles of any type of SMT machine can be cleaned. Compressed air will blow dry automatically after cleaning

Inspection: take out the fixture tray and put it on the special suction nozzle inspection device for inspection, and observe the real clean condition of the suction nozzle after cleaning
 

• * 30 suction nozzles are cleaned at a time, with short cleaning time and high efficiency 
  * Instead of traditional manual cleaning, solve the problem of ultrasonic cleaning and reduce the phenomenon of chip throwing 
  * Atomized water, supersonic spray cleaning, completely solve the dirt and impurities that cannot be cleaned by ultrasonic

  * It will not be unclean due to the smaller and smaller diameter of suction nozzle 
  * More thorough cleaning, directly extend the life of suction nozzle, and the cleaning rate is more than 99%

  * Easy to operate, the interface can switch between Chinese and English 
  * Never use cleaning agent, only clean with clean water or deionized water

  * Touch screen control interface, easy to understand operation 
  * Suitable for all kinds of applicator nozzles, The cleaning effect of cross, I-shaped and special suction nozzle is more obvious
  
   

  Equipment size

     L× W×H

  440×500 ×530 （mm）

  Equipment weight

  quality

  35KG

  Cleaning liquid

  Type of cleaning fluid

  Industrial purified water

  Consumption

  ≤350CC/H

  Use fluid

  Gas source

  compressed air

  Operating pressure range

  0.5 - 0.65Mpa(When cleaning)

  Injection pressure

  ≤0.4Mpa

  Air consumption

  ≤280ml/min

  Power Supply

  Voltage

  AC220V  50HZ

  Rated power consumption

  Maximum 100W

  Suction tray

  Specifications

           30 PCs