The machine is composed of cleaning system, rinsing system, fine rinsing, drying system and filtration system

100% Close loop operation, Zero discharge

The equipment is rinsed with water-based liquid detergent and DI water, without any potential safety hazard and no harm to personnel

 

• ◆High pressure spray system for PCB / PCBA cleaning process with water-based detergent

  ◆Three liquid tanks equipped with heating system to meet the needs of cleaning, rough rinsing, fine rinsing and hot air drying

  ◆Process flow: Cleaning - chemical isolation - rinsing (open-loop / closed-loop) - drying

  ◆Advanced automatic touch screen operation software, program files can be saved and easy to use

  ◆The counting function of the system can automatically accumulate the number of cleaning PCB boards and the number of cycles of filtering

  ◆The liquid and pump pressure can be displayed by the panel pressure gauge to feed back the operation status of the equipment in time

  ◆Conductivity monitoring rinse liquid to ensure cleanliness, conductivity can be set to meet different PCB process requirements

  ◆Solid and durable overall stainless steel body; acid or alkaline detergent resistant

  ◆The rinsing method is overflow, and the water from the fine rinsing overflows to the rough rinsing tank without repeated pollution

  ◆High pressure fan + hot air drying, the drying effect is faster and thorough

  ◆Running cost more low, just consumption 80-120ml solvent for pre clean cycle. the residual liquid on pipeline and pump will direct recycle, could reduce 50% consumption
  
   

  Dimension（mm）	L1670*W1100*H1860
  Power supply	Three phase380V（3 phase 5 cable）
  Total Power	33KW
  Current	50A
  Air supply	0.4-0.6Mpa
  Exhaust port	Ø125
  Clean tank volume	42L
  Pre-rinse tank volume	28L
  Rinse tank volume	55L
  Filter	0.2μm  10 inch
  Clean basket	500*550*100MM（two layer）
  Clean time	8--10Min
  Clean method	Spray-Pre rinse- Rinse- hot-air drying
  Control	PLC+Touch screen（ One button start ）